Book a consultation
Composit Linea 30 handleless kitchen

Linea · Modern Collection

Linea 30 and the beauty of a beveled edge

Thirty degrees is all it takes. Linea 30 cuts the end of each door at an angle, so your fingers slip behind it from a flat channel and the kitchen stays perfectly clean in line.

Trenta gradi di eleganza.Thirty degrees of elegance.

I. Il taglio

A cut instead of a handle

The secret of Linea 30 is in the door itself. Its terminal edge is beveled at 30°, which creates a natural finger hold above a flat channel profile.

The result opens doors and deep pan drawers with one easy movement, while the fronts read as uninterrupted planes.

Linea 30 drawers with 30-degree beveled edges

II. Il profilo

Flat, quiet, precise

Linea 30 uses a flat channel profile, finished in chromed aluminium, titanium or anodized black. On white lacquer, an anodized detail gives a fine graphic line; on dark Fenix it nearly vanishes.

Linea 30 kitchen with mixed lacquer and wood fronts

III. Le finiture

From white lacquer to rosewood

Doors are 7/8 in (22 mm) in a deep range of surfaces: matt and gloss lacquers, open-pore and stained oak, rosewood and walnut veneers, Fenix, resin, HPL, Laminam and Natural Wood.

  • Lacquers such as A03 lime and A36 London grey
  • Fenix FXGA grigio antrim saten, FXNI nero ingo
  • Resin RSGA anthracite
  • Veneers incl. LF rosewood, LH American walnut
  • Laminate N4 rovere termico
Linea 30 kitchen with dark island in a San Francisco home

IV. San Francisco

A hillside kitchen by the bay

In San Francisco, Linea 30 sets Fenix grigio antrim saten on base and tall units against an island in Fenix nero ingo. Ribbed black oak dresses the island back, anthracite resin wall units float above, and rosewood warms the open units.

V. La scelta

Is Linea 30 right for you?

Choose Linea 30 if you love the flattest possible facade. The channel sits flush and the bevel is barely visible, so long runs of lacquer or Fenix look almost monolithic.

If you prefer a deeper grip, Linea Pure's L-profile or the edge grip of Linea Edge may suit you better. We keep sample doors so you can feel the difference with your own hands.

Many clients settle the question in minutes, simply opening drawers the way they would at home.

VI. Los Angeles

White lacquer beside the pool

In a Los Angeles villa, glossy white A03 lacquer meets thermal-oak laminate N4 and anodized aluminium, linking kitchen, living room and garden. It is a palette that would suit a bright Woodlands home just as well.

We measure, design in 3D and install Linea 30 with our own team.

Linea 30 kitchen in white lacquer and oak in a Los Angeles villa

La scheda

The facts, at a glance

Finish codes follow Composit’s 2025–2026 catalogs. We bring the physical samples to your consultation.

DesignerDelta Studio
Opening systemFlat channel profile; door end beveled at 30°
Door thickness7/8 in (22 mm)
Channel finishesChromed aluminium, titanium, anodized black
Signature finishesA03 gloss lacquer, N4 rovere termico laminate, FXGA / FXNI Fenix, RSGA resin, LF rosewood
US projectsSan Francisco, Los Angeles

Domande

Questions we hear in the showroom

How do you open a Linea 30 door?

You slip your fingers into the flat channel and behind the 30° bevel on the door's edge, then pull. No handle is needed.

What is the difference between Linea 30 and Linea Pure?

Linea 30 uses a flat channel with a beveled door, while Linea Pure uses an L-shaped channel that leaves more room for the fingers.

Does Linea 30 work for pan drawers?

Yes. The bevel was conceived to make doors and deep pan drawers easy to open.

Which finishes look best on Linea 30?

Smooth surfaces such as gloss lacquer, Fenix and resin show the flat profile at its cleanest, while veneers like rosewood add warmth.

Cominciamo

Your Italian kitchen, planned in one conversation.

Bring a floor plan, a few photos or simply a wish list. We measure, design in 3D, order from the factory in Pesaro and install with our own team across Texas and Colorado.